Violin Tonal Adjustment

IMG_1435As a working luthier, I was lucky enough to have a number of experiences that led to a fairly unique position in the violin trade.  First, I started learning to play the cello at age 11 and then went on to a professional career as a cellist, which I still maintain  to this day, more than 50 years later.  During the 1970’s, I had the good fortune to study violinmaking and repair with master maker David Caron.  Through my years of apprenticeship with him, I was taught to adjust violin family instruments so they could sound their best.  Adjusting an instrument to sound its best involves a complex assessment from a number of points of view: structural, architectural, design, and tonal.

The first thing I do when a player brings in their instrument for a tonal adjustment — even before I study the instrument to assess the elements set forth above — is to listen to them play.  Through listening, I can figure out their style and approach to their instrument and assess how it functions.  As an experienced player myself, I am in a position to make these assessments, which many of my colleagues who have only a traditional violinmaking school background are not in a position to do.

The Performer’s Relationship with Their Instrument

While listening to my client, I not only can understand their relationship with their instrument, but also am able to hear and observe its response. I then take the instrument and study it to ascertain its various characteristics.  To me, it is very important to recognize, through identifying the school of making from which it came, or which it is trying to copy, a number of variables:  the thickness of the plates in relation to the design of the model, the arching of the top and the back both side to side and along its length, the neck angle in relation to that arching, and the consistency (hardness) of the varnish.

My main goal in the set up and adjusting of an instrument is quickness and evenness of response throughout the frequency range of the overtone series.  For example, French instruments made from the late 19th century onward throughout a great deal of the 20th century often had a hard, brittle spirit-based varnish, and the necks were set with a very high projection, with a very low over stand.  These factors inevitably tend to emphasize mostly the upper partials of the overtone series, which sound very bright and harsh to the ear, and often create a certain amount of “white noise”, or static which also exaggerates the perception of harshness, especially on the bass strings, and an often piercing edge on the treble side.

Several Considerations

My approach to such an instrument has several considerations.  If I am only being asked to adjust the sound post, I ascertain how close it is to the bridge, both to the back of the bridge foot, and the edge of the bridge foot in relation to its treble edge.  If I feel that I can improve the tone by moving the post in a certain direction, as soon as I move the post, I am able to discern both how it fits, and whether or not is too loose or to tight.  If an arching is too stiff, and the hardness or inflexibility of the varnish are present, then I often ask permission to remove the sound post to study its own hardness and thickness in relation to the instrument it is in, and may start by simply shortening the post.

If I determine that the post is too thin, or the wood too hard for this particular instrument, I make a new one, usually from Engelmann spruce which I have found to be very strong, light and generally somewhat broader in grain than other spruces which makes it particular suited to French instruments. I also try to fit the post further away from the bridge foot than many of my colleagues in order to give the arching as much flexibility as it needs to function properly.  If I feel the need and am given permission to make a new bridge to help a particular instrument sound its best, I incorporate that into the process.  I try to choose a bridge of suitable hardness for this instrument, and make sure that it is of a correct width for where the bass bar is located in relation to both the bass sound hole and the center joint.

The Bridge

Once I have determined the proper location and width, (not thickness) of the bridge, I try to remove as little off the bottom of the bridge feet as possible to properly fit the arching as a way to help mitigate the often super high neck projection of a French school instrument from the period as discussed above.  This is done, by fitting the bridge feet in such a way that there is the least amount of wood left over the heart of the bridge given the (usual) high projection of the neck.  As a rule, the less amount of wood over the heart, the darker the sound, which emphasizes the fundamental and midrange of the overtone series.  Conversely, the more wood over the heart, the more emphasis there is on mostly the upper partials.

Also, it is very important that the overall thickness of the bridge should correspond to the hardness of the bride blank that I have chosen. The other thing I do is to make the bass side of the bridge thinner than the treble side.  If you remember, I mentioned that French instruments from this period tend to create white noise in the sound, and this is often reflected by a certain amount of fuzziness and lack of clarity in bass, and a very nasal, often piercing tone on the e string.  If one leaves a little more wood on the treble side of the bridge, and less on the bass side, it helps to mitigate this tendency and lead to a more balanced tone.

In future discussions I will explore the methods I use for other schools of violin making when I am setting up or simply adjusting an instrument.